NSK America Catalog 2016/2017

2-p68 “E3000 SERIES” ø1.18" (ø30 mm) SPEED REDUCER 8 APPLICATION EXAMPLES EmaxEVO ESPERT ROTUS IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 2 ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" MA ø0.897" 3 1 AIR LINE KIT 5 HES510 HES810 HTS HPS Xpeed 4 PARTS 6 7 INDEX TECHNICAL DATA E2530 / E2550 ø1.0"/ø0.98" E2530 / E2550 ø0.897" iSpeed3 E3000 - One Piece E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 2.09" Maximum rotating speed at the cutting tool 7,500 min -1 (rpm) Maximum allowable motor speed 30,000 min -1 (rpm) ø30 mm 0 -0.01 (ø1.18") 0.31" Grease Point 2.76" Maximum rotating speed at the cutting tool 1,870 min -1 (rpm) Maximum allowable motor speed 30,000 min -1 (rpm) ø30 mm 0 -0.01 (ø1.18") 0.31" Grease Point • If the speed reducer is connected between the motor and the spindle, it reduces the rotating speed and increases the torque while keeping the motor speed unchanged. 1 4 Reduction Ratio 1 16 Reduction Ratio ASE1507 SPEED REDUCER 1/4 ARG-011E CAT. No. • Speed Reducing Mechanism ............. By planetary gear system • Weight .................................................................. 8.54 oz. • If the speed reducer is connected between the motor and the spindle, it reduces the rotating speed and increases the torque while keeping the motor speed unchanged. Maximum allowable motor speed 30,000 min -1 (rpm) Maximum rotating speed at the cutting tool 7,500 min -1 (rpm) <Reduction Ratio : 1/4> CAT. No. Model Speed Reduction Ratio Price ASE1507 ARG-011E Speed Reduction Ratio 1/4 Speed Reducer 1/4 ASE1508 SPEED REDUCER 1/16 ARG-021E CAT. No. • Speed Reducing Mechanism ............. By planetary gear system • Weight ................................................................ 11.46 oz. Maximum allowable motor speed 30,000 min -1 (rpm) Maximum rotating speed at the cutting tool 1,870 min -1 (rpm) <Reduction Ratio : 1/16> CAT. No. Model Speed Reduction Ratio Price ASE1508 ARG-021E Speed Reduction Ratio 1/16 Speed Reducer 1/16 Caution : Use the motor at motor speed less than maximum allowable speed or use the speed reducer. DO NOT exceed the allowable motor speed for the spindle and the reducer. To extend the life expectancy of the Speed Reducer, inject grease every 70 to 100 hours. Grease injection prevents friction of the internal gears as well as heat generation. Adding grease also prevents the degradation of the existing grease in the reducer. Please maintain a reducer grease maintenance program. To extend the life expectancy of the Speed Reducer, inject grease every 70 to 100 hours. Grease injection prevents friction of the internal gears as well as heat generation. Adding grease also prevents the degradation of the existing grease in the reducer. Please maintain a reducer grease maintenance program. • 3 Meter long Interface Cable provides a DB25 Male Connector at one end and a blunt cut on the opposite end. Includes a pin-out wire diagram for easy interfacing of I/O signals from any NSK Control to a CNC Control. 25 Pin INTERFACE CABLE CAT. No. DB25M For NSK Control Connector A Price Model DB25M 25 Pin Interface Cable • 3 Meter long Interface Cable provides a DB15 Male Connector at one end and a blunt cut on the opposite end. Includes a pin-out wire diagram for easy interfacing of the (OP1) “E-Stop Input Circuit” and “Safety Relay Circuit” from the NSK Control to a CNC Control. 15 Pin INTERFACE CABLE CAT. No. DB15M For NSK Control Connector B Price Model DB15M 15 Pin Interface Cable

RkJQdWJsaXNoZXIy MTUyNjg=