NSK America Catalog 2016/2017

2–p24 8 APPLICATION EXAMPLES EmaxEVO ESPERT ROTUS IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 2 ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" MA ø0.897" 3 1 AIR LINE KIT 5 HES HTS HPS PLANET Xpeed ABT 4 PARTS 6 7 INDEX TECHNICAL DATA E2280 ø1.0"/ø0.98" E2280 ø0.897" iSpeed3 E3000 - One Piece E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 “E2280 SERIES” ø1.0", ø0.98"(ø25.4, ø25 mm) SPEED REDUCER • If the speed reducer is connected between the motor and the spindle, it reduces the rotating speed and increases the torque while keeping the motor speed unchanged. 1.87" Maximum rotating speed at the cutting tool 7,500 min -1 (rpm) Maximum allowable motor speed 30,000 min -1 (rpm) D 1 4 Reduction Ratio Caution : Use the motor at motor speed less than maximum allowable speed or use a speed reducer. DO NOT exceed the allowable motor speed for the spindle and the reducer. 2.54" Maximum rotating speed at the cutting tool 1,870 min -1 (rpm) Maximum allowable motor speed 30,000 min -1 (rpm) D 1 16 Reduction Ratio SPEED REDUCER 1/16 ARG-H2516N • If the speed reducer is connected between the motor and the spindle, it reduces the rotating speed and increases the torque while keeping the motor speed unchanged. AS81828P CAT. No. • Speed Reducing Mechanism .............. By planetary gear system • Weight .................................................................. 7.23 oz. SPEED REDUCER 1/4 ARG-H2504N AS81826P CAT. No. • Speed Reducing Mechanism .............. By planetary gear system • Weight .................................................................. 5.29 oz. CAT. No. Model Outside Diameter Speed Reduction Ratio AS81826P ARG-H2504N ø1.0" (ø25.4 mm) ø0.98" (ø25 mm) Speed Reduction Ratio 1/4 Speed Reducer D=ø1.0"(ø25.4 mm), ø0.98"(ø25 mm) AS81822P ARG-2504N Price CAT. No. Model Outside Diameter Speed Reduction Ratio AS81828P ARG-H2516N ø1.0" (ø25.4 mm) ø0.98" (ø25 mm) Speed Reduction Ratio 1/16 Speed Reducer D=ø1.0"(ø25.4 mm), ø0.98"(ø25 mm) AS81824P ARG-2516N Price Maximum allowable motor speed 30,000 min -1 (rpm) Maximum rotating speed at the cutting tool 1,870 min -1 (rpm) <Reduction Ratio : 1/16> Maximum allowable motor speed 30,000 min -1 (rpm) Maximum rotating speed at the cutting tool 7,500 min -1 (rpm) <Reduction Ratio : 1/4> • 3 Meter long Interface Cable provides a DB25 Male Connector at one end and a blunt cut on the opposite end. Includes a pin-out wire diagram for easy interfacing of I/O signals from any NSK Control to a CNC Control. 25 Pin INTERFACE CABLE CAT. No. DB25M For NSK Control Connector A Price Model DB25M 25 Pin Interface Cable • 3 Meter long Interface Cable provides a DB15 Male Connector at one end and a blunt cut on the opposite end. Includes a pin-out wire diagram for easy interfacing of the (OP1) “E-Stop Input Circuit” and “Safety Relay Circuit” from the NSK Control to a CNC Control. 15 Pin INTERFACE CABLE CAT. No. DB15M For NSK Control Connector B Price Model DB15M 15 Pin Interface Cable

RkJQdWJsaXNoZXIy MTUyNjg=