NSK America Catalog 2016/2017

2–p34 8 APPLICATION EXAMPLES EmaxEVO ESPERT ROTUS IMPULSE PRESTO II SHEENUS neo SONIC CUTTER 2 ø1.0" ø0.98" ø1.18" MS ø0.75" ø0.79" ø0.87" ø0.91" ø1.0" ø0.98" MA ø0.897" 3 1 AIR LINE KIT 5 HES HTS HPS PLANET Xpeed ABT 4 PARTS 6 7 INDEX TECHNICAL DATA E2280 ø1.0"/ø0.98" E2280 ø0.897" iSpeed3 E3000 - One Piece E3000 - Modular ø1.18" ø1.0"/ø0.98" ø0.897" E3000 - 80,000rpm E4000 “E2280 SERIES” ø0.897"(ø22.8 mm) SPEED REDUCER Caution : Use the motor at motor speed less than maximum allowable speed or use the speed reducer. DO NOT exceed the allowable motor speed for the spindle and the reducer. 1 15.39 Reduction Ratio 2.21" Maximum rotating speed at the cutting tool 1,940 min -1 (rpm) Maximum allowable motor speed 30,000 min -1 (rpm) ø22.8 mm 0 -0.01 (ø0.897") 1.65" Maximum rotating speed at the cutting tool 7,650 min -1 (rpm) Maximum allowable motor speed 30,000 min -1 (rpm) ø22.8 mm 0 -0.01 (ø0.897") 1 3.92 Reduction Ratio AS11414 SPEED REDUCER 1/3.92 ARG-01 CAT. No. Model Speed Reduction Ratio Price AS11414 ARG-01 Speed Reduction Ratio 1/3.92 Speed Reducer 1/3.92 CAT. No. • Speed Reducing Mechanism ............. By planetary gear system • Weight .................................................................. 3.81 oz. SPEED REDUCER 1/15.39 ARG-02 AS11428 CAT. No. • Speed Reducing Mechanism ............. By planetary gear system • Weight ................................................................. 5.22 oz. Speed Reducer 1/15.39 CAT No. Model Speed Reduction Ratio Price AS11428 ARG-02 Speed Reduction Ratio 1/15.39 • If the speed reducer is connected between the motor and the spindle, it reduces the rotating speed and increases the torque while keeping the motor speed unchanged. • If the speed reducer is connected between the motor and the spindle, it reduces the rotating speed and increases the torque while keeping the motor speed unchanged. Maximum allowable motor speed 30,000 min -1 (rpm) Maximum rotating speed at the cutting tool 1,940 min -1 (rpm) <Reduction Ratio : 1/15.39> Maximum allowable motor speed 30,000 min -1 (rpm) Maximum rotating speed at the cutting tool 7,650 min -1 (rpm) <Reduction Ratio : 1/3.92> • 3 Meter long Interface Cable provides a DB25 Male Connector at one end and a blunt cut on the opposite end. Includes a pin-out wire diagram for easy interfacing of I/O signals from any NSK Control to a CNC Control. 25 Pin INTERFACE CABLE CAT. No. DB25M For NSK Control Connector A Price Model DB25M 25 Pin Interface Cable • 3 Meter long Interface Cable provides a DB15 Male Connector at one end and a blunt cut on the opposite end. Includes a pin-out wire diagram for easy interfacing of the (OP1) “E-Stop Input Circuit” and “Safety Relay Circuit” from the NSK Control to a CNC Control. 15 Pin INTERFACE CABLE CAT. No. DB15M For NSK Control Connector B Price Model DB15M 15 Pin Interface Cable

RkJQdWJsaXNoZXIy MTUyNjg=